EasyManua.ls Logo

Fujitsu ETERNUS DX8100 S3 - Page 253

Fujitsu ETERNUS DX8100 S3
423 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5 Connectivity Status
5.2 Host Group
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
253
IPv6 Address Notation
Since the IPv6 address is 128-bit and extremely long, this address is displayed using "xxxx", which describes
16-bit in hexadecimals as being one block that is separated by colons (":").
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
Use 0 - ffff (FFFF) (hexadecimal, alphanumeric characters) for inputting an IPv6 address.
The current setting is displayed with 0 - ffff (hexadecimal, "a" - "f" are lowercase letters)
Up to 128-bit
The first 64-bit (prefix) of the link local address is fixed to "fe80::".
The following three abbreviation methods are available for IPv6 addresses:
(1) Omission of the first "0" of a block that follows consecutive zeros.
(2) Replacement of "0000" blocks with "0".
(3) Replacement of a block with consecutive zeros by "::" is performed only once.
2001:1000:120:0000:0000:123:0000:0000
[Example] 2001:1000:0120:0000:0000:0123:0000:0000
[Example] 2001:1000:120:0000:0000:123:0000:0000
2001:1000:120:0:0:123:0:0
(Replacement of a block with consecutive zeros by "::" is allowed only once.)
2001:1000:120::123:: is not allowed
2001:1000:120::123:0:0 is OK
[Example] 2001:1000:120:0:0:123:0:0

Table of Contents

Other manuals for Fujitsu ETERNUS DX8100 S3

Related product manuals