Chapter 8 Advanced Copy Status
8.7 Settings (Advanced Copy)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
385
8.7.2 Copy Path
This function displays the REC path status between the local and remote storage systems. It shows whether
the copy path created with the function in "Set Copy Path" is operating properly. Refer to "Set Copy Path" in
"ETERNUS Web GUI User’s Guide (Settings)".
Select the target remote storage system. (Up to 16 storage systems can be registered.) The following items
are displayed.
• Storage System
• Advanced Copy Path Status
• The ETERNUS DX60 S3 does not support this function.
• After creating the copy paths, make sure to check the copy path status with this function.
• This function is displayed only when the Advanced Copy function license or the Storage Cluster function
license has been registered, and when using an ETERNUS DX/AF model that supports REC.
• The "Priority Level" and the "Multiplicity" settings can be specified for each remote Box ID. Refer to
"Modify REC Multiplicity" in "ETERNUS Web GUI User’s Guide (Settings)" for details.
• To change the "Link Speed" setting, create a copy path with a new link speed by using the [Set Copy Path]
function, and apply the created copy path to the related storage systems. Refer to "Set Copy Path" in
"ETERNUS Web GUI User’s Guide (Settings)" for details.
To Next Page
Loading...
