Fujitsu ETERNUS DX8100 S3 - Advanced Copy (Property)

Chapter 8 Advanced Copy Status
8.8 Advanced Copy (Property)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
393
8.8 Advanced Copy (Property)
Detailed information (Property) about the Advanced Copy is displayed.
■ For Local Copy
The following items are displayed in the Main area:
• Session ID
The session ID selected in the [Local Copy] screen is displayed.
• Source Volume Name
The copy source volume name is displayed. If the status is " Reserved", a "-" (hyphen) is displayed.
• Destination Volume Name
The copy destination volume name is displayed. When the "Status" is " Reserved" or when the copy ses-
sion type is "MON", a "-" (hyphen) is displayed.
• Copy Range
The copy range of the copy session is displayed. If the status is " Reserved", a "-" (hyphen) is displayed.
- Totally
Whole volume
- Extent
Part of volume
• Secondary Access Permission
If the status is " Active", accessibility from the host to the copy destination volume is displayed. This
item is displayed in EC. If the status is " Reserved", a "-" (hyphen) is displayed.
- Read Only at Equivalency
When the "Phase" is "Equivalent", only read access to the copy destination volume is allowed
- No Read/Write
No read/write access to the copy destination volume is allowed