Fujitsu ETERNUS DX8100 S3 - Flexible Tier Pool Detail (Flexible Tier Sub Pool)

Chapter 7 Thin Provisioning Pool Status
7.2 Flexible Tier Pools
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
346
7.2.3 Flexible Tier Pool Detail (Flexible Tier Sub Pool)
Click the [No.] link or the [Name] link on the "7.2 Flexible Tier Pools" (page 340) to display the corresponding
Flexible Tier Pool Details screen.
Click the [Flexible Tier Sub Pool] tab on the [Flexible Tier Pool Detail] screen to display a list of FTSPs that are
registered in the corresponding FTRP.
The following items are displayed in the Main area:
• No.
The FTSP number is displayed. Click this item to display the screen shown in "7.2.5 Flexible Tier Sub Pool
Detail (Basic)" (page 349).
• Name
The FTSP name is displayed. Click this item to display the screen shown in "7.2.5 Flexible Tier Sub Pool
Detail (Basic)" (page 349).
• Status
The FTSP status is displayed. Refer to "A.4 Thin Provisioning Pool Status" (page 409)
for detailed
information of FTSP status.
• Drive Type
The type of drive that is used to configure the FTSP is displayed.
- Online
SAS disks
- Nearline
Nearline SAS disks
- SSD
SSDs (*1)
- Online SED
Online SEDs
- Nearline SED
Nearline SEDs
- SSD SED
SSD SEDs
*1: "SSD" is displayed regardless of the actual SSD type (SSD-M/SSD-L/SSD).