ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
404
Appendix A
Status List
The status of the ETERNUS DX/AF, volumes, RAID groups, Thin Provisioning Pools, components, an SED
authentication key (hereinafter, referred to as "key"), and key servers that are displayed in the operation
screens is described below.
A.1 Storage System General Status
The general status of the ETERNUS DX/AF is displayed as an icon with character strings.
A "Normal (green)" general status icon indicates normal status, while other color images indicate a failure.
The meaning of each general status icon is described below.
Device general status Description
(Green)
The ETERNUS DX/AF is in the normal state.
(Orange)
The ETERNUS DX/AF is under maintenance.
(Yellow)
The ETERNUS DX/AF is in the warning state.
(Red)
The ETERNUS DX/AF is in the failed status.
(Red)
"Not Ready" is a status where an abnormality is detected at a power-off, and I/O
access from the host cannot be received.
To Next Page
Loading...
