Fujitsu ETERNUS DX8100 S3 - Storage System General Status (Detail)

Appendix A Status List
A.1 Storage System General Status
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
405
A.1.1 Storage System General Status (Detail)
The general status of the ETERNUS DX/AF (detail) is displayed with an icon and character string, or only
character string.
The meaning of ETERNUS DX/AF general status (detail) is described below.
Device general status (detail) Device general status Description
Normal
(Green)
The ETERNUS DX/AF is in the normal state.
Maintenance
(Orange)
Components that are undergoing maintenance
exist in the ETERNUS DX/AF.
Rebuild or copyback is being performed.
Change Controlling CM
(Orange)
Changing of the Controlling CM is required.
Pinned Data
(Yellow)
Pinned data is detected.
Warning
(Yellow)
A component requires preventive maintenance.
A bad sector is detected.
Error
(Red)
A component has an error.
Not Ready (*)
(Red)
A failure is detected when starting or turning off
the ETERNUS DX/AF. I/O from the host cannot be
received normally.
*: The number, which indicates the factor of being
"Not Ready", is displayed.
Subsystem Down
(Red)
The ETERNUS DX/AF is in failed status. I/O from the
host cannot be received normally.
Unknown
(Red)
A status other than the ones listed above.