Fujitsu ETERNUS DX8100 S3 - Service Controller Detail

Chapter 3 Component Status
3.12 Service Controller Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
146
3.12 Service Controller Detail
The detailed information for the SVC is displayed.
■ Summary
The following items are displayed in the Main area:
• Location
The SVC number is displayed.
• Status
The SVC status is displayed. Refer to "A.5 Component Status" (page 410)
for details.
• Status Code
The SVC status code is displayed.
• Error Code
The SVC error code is displayed.
• Part Number
The part number of the SVC is displayed.
• Serial No.
The serial number of the SVC is displayed.
• Hardware Revision
The hardware version of the SVC is displayed.
• Active EC
The EC number of the current controller firmware is displayed.
• Next EC
The EC number of the controller firmware that is to be run at the next power-on is displayed.
• Firmware Version
The current controller firmware version is displayed.