Fujitsu ETERNUS DX8100 S3 - Page 147

Chapter 3 Component Status
3.12 Service Controller Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
147
■ Internal Parts
The following items are displayed in the Main area:
• Parts
Information for the Management cable that connects between the CM and SVC is displayed. By clicking this
item, the [Management Cable Detail] screen is displayed. Refer to "3.23 Management Cable Detail" (page
173) for display items.
• Status
The Management cable status is displayed. Refer to "A.5 Component Status" (page 410)
for details.
• Error Code
The Management cable error code is displayed.
■ View
The following items are displayed in the Main area:
• Storage system image
The front view of the FE that is installed in the ETERNUS DX is displayed.
Components that are not the target SVC are grayed out.
The SVC status is displayed with an icon. Refer to "A.5 Component Status" (page 410)
for details.