Fujitsu ETERNUS DX8100 S3 - Host Group Detail

Chapter 5 Connectivity Status
5.2 Host Group
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
248
Filter setting
5.2.1 Host Group Detail
The details of the host group are displayed.
The following items are displayed in the Main area:
● Host Group Information
• Name
The host group name is displayed.
• Host Response
The host response, which has been assigned to a host group, is displayed.
• Status
Whether the host group is "Active" or "Inactive" in the host affinity setting is displayed.
• Number of Hosts
The number of hosts, which have been registered in the host group, is displayed.
Filter Description
Name
Input the host group name that is to be displayed.
When not using the name for filtering, leave this item blank.
Type Select the interface type of the host group that is to be displayed.
Status Select the set state of the host affinity for the host group that is to be displayed.
Host Response
Select the name of the host response that is assigned to the host group that is to be
displayed.