Fujitsu ETERNUS DX8100 S3 - Host Response

Chapter 5 Connectivity Status
5.5 Host Response
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
271
5.5 Host Response
The registered host responses are displayed.
The host response configures the appropriate operation mode on which the host makes connection. The usual
host connection uses a recommended pattern or the default setting which have been arranged in advance in
accordance with each OS type.
When customizing the host response in accordance with the OS type or the operating environment, refer to
"Add Host Response" in "ETERNUS Web GUI User’s Guide (Settings)".
The following items are displayed in the Main area:
• Name
All of the host responses, which have been registered in the ETERNUS DX/AF, are displayed.
- Solaris MPxIO
- HP-UX
- AIX
- AIX VxVM
- VS850/SVC
- BS2000
- Host responses registered in the ETERNUS DX/AF
- Default
• Status
The usage of the host response ("Active" or "Inactive") is displayed.
- Active
A host response which is being used on host, host group, or host affinity.
- Inactive
A host response which is not being used on host, host group, or host affinity.