Fujitsu ETERNUS DX8100 S3 - A.5.1 Drive Status; Drive Status

Appendix A Status List
A.5 Component Status
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
411
A.5.1 Drive Status
Drive status is displayed with an icon and the status name. The drive status is described below.
Status Description
Available
The drive is in the normal state.
The drive is used in the RAID group.
Spare
The drive is an unused hot spare.
Present
The drive is not used (not registered as a RAID group or hot spare), or is waiting
for rebuild/copy back.
Readying
The drive is starting up.
Rebuild/Copyback
Rebuild or copy back is being performed in the drive.
Redundant Copy
A Redundant copy is being performed in the drive.
Not Supported
The drive is not supported. [Example] Drive capacity is insufficient.
Not Exist
The drive cannot be recognized.
Failed Usable
An error involving RAID group failure has occurred in the drive.
Broken
An error has occurred in the drive.
Unknown
A status other than the ones listed above.