Appendix A Status List
A.7 Key Server Status
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
413
A.7 Key Server Status
Key server status is displayed with the status name. The key server status is described below.
*1: "Self-signed SSL certificate" or "SSL server certificate"
Status Description
Normal
The communication between the ETERNUS DX/AF and the key server is normal.
The key can be obtained successfully. The key server is in the normal state.
Setting
"Setting" indicates the following conditions:
• The "SSL / KMIP Certificate" (key server certification) or SSL certificate (*1) is
not registered.
• The network between the ETERNUS DX/AF and the key server is normal, but
connection to the key server is forbidden.
Network Error
The network between the ETERNUS DX/AF and the key server is not connected
normally.
Key Acquisition Failure
The key that is requested from the ETERNUS DX/AF does not exist in the key
server.
Key Server Error An error due to a failure other than key acquisition failure is detected.
Internal Error
Communication to the key server could not be performed due to an internal
failure of the ETERNUS DX/AF.
To Next Page
Loading...
