Fujitsu ETERNUS DX8100 S3 - ODX Sessions

Chapter 8 Advanced Copy Status
8.4 ODX Sessions
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
374
8.4 ODX Sessions
This function displays the status for ODX sessions.
ODX sessions are created when the ODX function is used for a server with "Windows Server 2012". The ODX
function offloads the workload for copying or migrating data from the server to the ETERNUS DX/AF.
The following items are displayed in the Main area:
• Session ID
The session ID is displayed.
Click this item to display the screen shown in "8.8 Advanced Copy (Property)" (page 393)
or "8.9 Advanced
Copy (Extent information)" (page 400).
• Source Volume No.
The copy source volume number is displayed. If the status is " Reserved", a "-" (hyphen) is displayed.
• Destination Volume No.
The copy destination volume number is displayed. If the status is " Reserved", a "-" (hyphen) is
displayed.
• Status
The copy session status is displayed.
- Active
Operating normally
- Reserve
Session ID reserved
- Error Suspend
Copy canceled due to an error
- Unknown
A status other than the ones listed above