Fujitsu ETERNUS DX8100 S3 - Flexible Tier Sub Pool Detail (RAID Group)

Chapter 7 Thin Provisioning Pool Status
7.2 Flexible Tier Pools
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
351
7.2.6 Flexible Tier Sub Pool Detail (RAID Group)
Click the [No.] link or the [Name] link on the "7.2.3 Flexible Tier Pool Detail (Flexible Tier Sub Pool)" (page
346) to display the detailed information of the corresponding Flexible Tier Sub Pool.
Click the [RAID Group] tab on the [Flexible Tier Sub Pool Detail] screen to display the drive list that configures
the relevant RAID group.
The following items are displayed in the Main area:
• No.
The number of the RAID group that belongs to the FTSP is displayed. Click this item to display the [RAID
Group Detail] screen.
• Name
The RAID group name is displayed. Click this item to display the [RAID Group Detail] screen.
• Status
The RAID group status is displayed. Refer to "A.3 RAID Group Status" (page 407)
for details.
• RAID Level
The RAID level is displayed.
- High Performance (RAID1+0)
- High Capacity (RAID5)
- High Reliability (RAID6)
- High Reliability (RAID6-FR)
- Mirroring (RAID1)
- Striping (RAID0)
• Total Capacity
The total capacity of the RAID groups is displayed.
• Used Capacity
The used capacity of the RAID groups is displayed.
"Used Capacity" indicates the total for the physically allocated capacities of the FTVs in the RAID group.