Fujitsu ETERNUS DX8100 S3 - Performance (Advanced Copy)

Chapter 4 Volume Status
4.4 Performance (Advanced Copy)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
206
4.4 Performance (Advanced Copy)
This function displays the performance information of the volumes for Advanced Copy.
The following items are displayed in the Main area:
• No.
The volume number is displayed. Click this item to display the [Volume Detail] screen.
• Name
The volume name is displayed. Click this item to display the [Volume Detail] screen.
• Type
The volume type is displayed.
- Standard
- WSV
- TPV
- FTV
- SDV
- SDPV
- Temporary
• The performance information is not displayed for Deduplication/Compression System Volumes.
• Performance information is obtained when performance monitoring is operated from ETERNUS Web GUI,
ETERNUS CLI, or any other monitoring software. Refer to "Start/Stop Performance Monitoring" in "ETERNUS
Web GUI User’s Guide (Settings)" for details on how to start performance monitoring with ETERNUS Web
GUI.
• The interval for acquiring performance information can be specified when starting the monitoring. When
using ETERNUS Web GUI, the default interval is 30 seconds.
• The average performance values during the specified interval are displayed.
• When the performance monitoring function is stopped, "0" is displayed as the performance information.