Chapter 8 Advanced Copy Status
8.7 Settings (Advanced Copy)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
383
8.7.1 Snap Data Pool
This function displays the usage of SDP.
SDP is the area used when in case executing SnapOPC and SnapOPC+ increases the amount of copy data and
exceeds the SDV capacity.
SDP becomes available when creating an SDPV. Created SDPV is automatically added to the SDP.
● For the ETERNUS DX60 S3
● For the other models
• This function is displayed only when the Advanced Copy function license has been registered or when the
Unified Storage function is enabled.
• Because the ETERNUS DX60 S3 does not support the encryption function, display items that follow "Total
Capacity" are displayed without the "Encrypted/Unencrypted" table heading.
To Next Page
Loading...
