Fujitsu ETERNUS DX8100 S3 - Page 382

Chapter 8 Advanced Copy Status
8.7 Settings (Advanced Copy)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
382
• Registration Date
The date when the trial license was registered is displayed. A "-" (hyphen) is displayed in the following
conditions:
- Trial license has never been registered.
- A paid license or a free license is registered.
• Expiration Date
The expiration date for the trial license is displayed. A "-" (hyphen) is displayed in the following conditions:
- Trial license has never been registered.
- A paid license or a free license is registered.
● Advanced Copy Settings
• Copy Table Size
A copy table size is displayed.
This item is displayed only when the Advanced Copy function license has been registered or when the
Unified Storage function is enabled.
• EC/OPC Priority
The EC/OPC priority is displayed.
This item is displayed only when the Advanced Copy function license or the Storage Cluster function license
has been registered.
- Automatic Priority
This mode changes the EC/OPC priority automatically in response to the operating load status.
- High Priority
This mode operates by making maximum use of internal resources.
- Middle Priority
This mode operates slightly slower than the High Priority mode.
- Low Priority
This mode reduces the effect on host access.
- Very Low Priority
This mode operates slower than the Low Priority mode.
• Current EC/OPC Priority
The current EC/OPC priority is displayed.
This item is displayed only when the Advanced Copy function license or the Storage Cluster function license
has been registered.
- High Priority
- Middle Priority
- Low Priority
- Very Low Priority
• ODX Buffer Volume
The registration status of the ODX Buffer volume is displayed.
- Registered
- Not Registered