Chapter 4 Volume Status
4.1 Volume (Basic Information)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
194
4.1 Volume (Basic Information)
This function displays the basic information of volumes.
The following items are displayed in the Main area:
• No.
The volume number is displayed.
During volume creation, the volume number can be allocated automatically or specified manually. When
the volume number is allocated automatically, the volume number is allocated from the smallest unused
decimal number in ascending order.
Click this item to display the [Volume Detail] screen. Refer to "4.11 Volume Detail (Basic)" (page 223)
for
display items.
• Name
The volume name is displayed. Click this item to display the [Volume Detail] screen. Refer to "4.11 Volume
Detail (Basic)" (page 223) for display items.
• Status
The volume status is displayed. When the volume status is normal, " Available" is displayed. Refer to
"A.2 Volume Status" (page 406)
for detailed information of volume status.
• Type
The volume type is displayed.
- Standard
Standard volumes are the most commonly used volumes that are created in RAID groups.
A standard volume is used for normal usage, such as file systems and databases. The server recognizes
it as a single logical unit.
- WSV
WSV is a volume that is created by concatenating distributed areas in from 2 to 64 RAID groups.
Processing speed is fast because data access is distributed.
The display process for the volume list may be delayed for a maximum of two minutes while a meta cache
redistribution is being performed for NAS volumes (NAS user volumes or NAS backup volumes).
To Next Page
Loading...
