Fujitsu ETERNUS DX8100 S3 - Advanced Copy (Basic Information)

Chapter 8 Advanced Copy Status
8.1 Advanced Copy (Basic Information)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
358
8.1 Advanced Copy (Basic Information)
This function displays the status of all the Advanced Copy sessions.
The following items are displayed in the Main area:
● Local / Remote Copy Sessions Information
• Session Count
The number of Advanced Copy sessions that are currently being performed for each type (EC, OPC,
QuickOPC, SnapOPC, SnapOPC+, Monitor, and REC) is displayed.
The "Session Count" is a total of copy sessions in all the statuses including " Reserved". Click the [Session
Count] link to display the list of sessions for each type.
- ETERNUS DX60 S3
0 - 1024
- ETERNUS DX100 S3
0 - 1024 (2048) (*1)
- ETERNUS DX200 S3
0 - 2048 (4096) (*1)
- ETERNUS DX500 S3/DX600 S3
0 - 8192
• To display the local/remote copy session information and the Advanced Copy information, register the
Advanced Copy license. Note that the Remote Copy Sessions Information and Remote Copy related cate-
gories (copy path, REC Buffer, and REC Disk Buffer) are displayed only when using an ETERNUS DX/AF
model that supports REC.
• In the Unified Storage environment, the following items are displayed even if the Advanced Copy function
license is not registered.
- Local Copy Sessions Information (SnapOPC+ Session)
- Advanced Copy Information (Usable Advanced Copy Size for SnapOPC+)
• Registering an Advanced Copy license is not required to display the Advanced Copy session information
for ODX sessions, Extended Copy (XCOPY) sessions, or Virtual Volume sessions.