Fujitsu ETERNUS DX8100 S3 - Page 359

Chapter 8 Advanced Copy Status
8.1 Advanced Copy (Basic Information)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
359
- ETERNUS DX8100 S3
0 - 8192
- ETERNUS DX8700 S3/DX8900 S3
0 - 32768
- ETERNUS AF250
0 - 2048
- ETERNUS AF650
0 - 8192
- ETERNUS DX200F
0 - 2048
*1: Values in parentheses indicate the number of sessions when "Expand Volume Mode" is "Enable". Refer to "Setup
Subsystem Parameters" in "ETERNUS Web GUI User’s Guide (Settings)" for details.
• Status
The status for each Advanced Copy session is displayed.
- Normal
All the copy sessions are in the normal state.
- Error
At least one copy session is not in the normal state.
● ODX Copy Sessions Information
An ODX session is created when the ODX function of Windows server 2012 is used.
• Session Count
The number of ODX sessions (0 - 4096) that are currently being performed is displayed.
The "Session Count" is a total of copy sessions in all the statuses including " Reserved". Click the [Session
Count] link to display the list of sessions.
• Status
The status for ODX sessions are displayed.
- Normal
All the copy sessions are in the normal state.
- Error
At least one copy session is not in the normal state.
● XCOPY Sessions Information
An XCOPY session is created when the Full Copy function of VMware VAAI is used.
• Session Count
The number of XCOPY (Extended Copy) sessions (0 - 4096) (*1) that are currently being performed is
displayed.
The "Session Count" is a total of copy sessions in all the statuses including " Reserved". Click the [Session
Count] link to display the list of sessions.
*1: An XCOPY session is created when the Full Copy function of VMware vStorage APIs for Array Integration (VAAI) is
used.