Chapter 2 System Status
2.3 Remote Support
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
51
• Proxy Server
The IPv4 address or the Fully Qualified Domain Name (FQDN) of the proxy server is displayed. If the proxy
server is not specified, the field is blank.
- IPv4 address
xxx.xxx.xxx.xxx
xxx: 0 - 255 (decimal)
- FQDN
Up to 63 alphanumeric characters and symbols
• Port No.
The port number for the proxy server is displayed. If the proxy server is not specified, the field is blank.
• Connection Type
The communication method for the proxy server is displayed. If the proxy server is not specified, the field is
blank.
- HTTP
- SOCKS
• User Name
The user name for proxy server authentication is displayed. If the proxy server is not specified, the field is
blank.
● Remote Session Permission
• Remote Session
Whether to permit or forbid a remote session from the AIS Connect server is displayed.
• Session Timeout
The timeout value for a remote session connection is displayed. If the timeout limit is not specified,
"Unlimited" is displayed.
If the time exceeds the specified value without a remote session connection, remote session permission is
disabled and the set state changes to "Forbid".
2.3.3 Root Certificate
This function displays the root certificate that is used for SSL communication with the AIS Connect server.
If multiple certificates are included in the root certificate file, up to 6 issuer names and their validity periods
are displayed.
• The root certificate that is registered in the ETERNUS DX/AF is displayed by default. When the root
certificate is updated, only the latest certificate is displayed. For details on how to update the root
certificate, refer to "Import Root Certificate" in "ETERNUS Web GUI User’s Guide (Settings)".
• The root certificate is only used for authentication with the AIS Connect server.
To Next Page
Loading...
