Fujitsu ETERNUS DX8100 S3 - Page 50

Chapter 2 System Status
2.3 Remote Support
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
50
The following items are displayed in the Main area:
● AIS Connect Environment
• AIS Connect
Whether the AIS Connect function is enabled or disabled is displayed.
When "Country of Installation (Country Code : Country Name)" has been set, the [Open remote service
conditions] link is displayed. Click this item to display the consent form regarding the handling of personal
information.
• Country of Installation (Country Code : Country Name)
The shipment destination (storage system location) is displayed in "Country Code : Country Name" format.
If not specified, "Not Selected" is displayed.
• Service Contract Responsibility (Country Code : Country Name)
The country in which the support office for the ETERNUS DX/AF is located is displayed in "Country Code :
Country Name" format.
• Use LAN Port
The LAN port that is used for communication with the AIS Connect server is displayed.
- MNT
- RMT
• SSL Server Certification
Whether the Secure Socket Layer (SSL) server certification is used (Use) or not (Not Use) is displayed.
• Automatic Log Transmission
Whether the automatic log transmission is enabled or disabled when an error occurs is displayed.
When "Automatic Log Transmission" is enabled, the ETERNUS DX/AF automatically sends logs to the AIS
Connect server when a fail event (error level or warning level) occurs.
This item is not displayed when "Service Contract Responsibility (Country Code : Country Name)" is not
specified from ETERNUS CLI.