Fujitsu ETERNUS DX8100 S3 - Tuning

Chapter 6 RAID Group Status
6.2 Tuning
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
310
6.2 Tuning
The RAID group tuning information is displayed.
The following items are displayed in the Main area:
• No.
The RAID group number is displayed. Click this item to display "6.5 RAID Group Detail (Basic)" (page 318)
.
• Name
The RAID group name is displayed. Click this item to display "6.5 RAID Group Detail (Basic)" (page 318)
.
• Status
The RAID group status is displayed. Refer to "A.3 RAID Group Status" (page 407)
for detailed information of
RAID group status.
• Usage
The usage of the RAID group is displayed.
- Standard
A RAID group that is used for creating "Standard", "SDV", or "SDPV" type volumes
- Standard / WSV
A RAID group that is used for creating the following volumes:
• "WSV" and "Standard"
• "WSV" and "SDV"
• "WSV" and "SDPV"
- WSV
A RAID group that is used for creating "WSV" type volumes
- TPP
A RAID group that belongs to a TPP
- FTRP
A RAID group that belongs to an FTRP
- RDB
A RAID group that is registered as an REC Disk Buffer
- Extreme Cache Pool
A RAID group that is registered as an Extreme Cache Pool