Chapter 8 Advanced Copy Status
8.7 Settings (Advanced Copy)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
391
8.7.4 REC Disk Buffer
This function displays the existing REC Disk Buffers in the ETERNUS DX/AF.
The following items are displayed in the Main area:
● REC Disk Buffer List
• No.
The RAID group number of the REC Disk Buffer is displayed. Click this item to display the [REC Disk Buffer
Detail] screen.
• Name
The REC Disk Buffer name is displayed. Click this item to display the [REC Disk Buffer Detail] screen.
• Status
The REC Disk Buffer status is displayed. Refer to "A.3 RAID Group Status" (page 407)
for details.
• Total Capacity
The total capacity of the REC Disk Buffer is displayed.
• Controlling CM
The Controlling CM of the REC Disk Buffer is displayed (x: CE number, y: CM number).
- For the ETERNUS DX8700 S3/DX8900 S3
CE#x CM#y
- For the other models
CM#y
• The ETERNUS DX60 S3 does not support this function.
• Drives are not monitored for bad sectors when the drives configure the REC Disk Buffer.
This function is displayed only when the Advanced Copy function license has been registered, and when
using an ETERNUS DX/AF model that supports REC.
To Next Page
Loading...
