Fujitsu ETERNUS DX8100 S3 - NAS Interface

Chapter 5 Connectivity Status
5.8 NAS
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
295
5.8.1 NAS Interface
This function displays a list of the NAS interfaces.
This function is displayed in a Unified Storage environment.
The following items are displayed in the Main area:
• No.
The NAS interface number is displayed 0 - 159.
• IP Address
The IPv4 address of the target port is displayed.
• Subnet Mask
The subnet mask of the target port is displayed.
• Gateway
The IPv4 gateway address of the target port is displayed.
• IPv6 Link Local Address
The IPv6 link local address of the target port is displayed.
• IPv6 Connect IP Address
The IPv6 connect IP address of the target port is displayed.
• IPv6 Prefix length
Whether the Routing Information Protocol (RIP) setting is enabled or disabled is displayed.
When this setting is enabled, the network settings are simplified.
• IPv6 Gateway
The IPv6 gateway address of the target port is displayed.
• RIP Setting
Whether the Routing Information Protocol (RIP) setting is enabled or disabled is displayed.
• VLAN ID
The VLAN ID of the target port is displayed.
If the VLAN ID is not specified, a "-" (hyphen) is displayed.
• Port
The location information of the port with the NAS interface setting is displayed.