Fujitsu ETERNUS DX8100 S3 - Power Supply Unit (FE)

Chapter 3 Component Status
3.3 Frontend Enclosure
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
104
The following items are displayed in the Main area:
• SVC
The SVC number is displayed. By clicking the SVC number, the [Service Controller Detail] screen is dis-
played. Refer to "3.12 Service Controller Detail" (page 146)
for display items.
• Status
The SVC status is displayed. Refer to "A.5 Component Status" (page 410)
for details.
3.3.3 Power Supply Unit (FE)
The information of PSU for FE is displayed.
This function is displayed for the ETERNUS DX8700 S3/DX8900 S3.
The following items are displayed in the Main area:
• Enclosure
The enclosure where the FPSU is installed is displayed.
• FPSU
The FPSU number is displayed. By clicking the FPSU number, the [FE Power Supply Unit Detail] screen is
displayed. Refer to "3.13 FE Power Supply Unit Detail" (page 148)
for display items.
• Status
The FPSU status is displayed. Refer to "A.5 Component Status" (page 410)
for details.