Fujitsu ETERNUS DX8100 S3 - Thin Provisioning Pool Detail (RAID Group)

Chapter 7 Thin Provisioning Pool Status
7.1 Thin Provisioning Pools
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
332
7.1.3 Thin Provisioning Pool Detail (RAID Group)
In this screen, a list of the RAID groups that configure the relevant TPP is displayed. When no RAID groups are
registered in the TPP, only the item name is displayed.
The following items are displayed in the Main area:
• No.
The RAID group number is displayed. Click this item to display "6.5 RAID Group Detail (Basic)" (page 318)
.
• Name
The RAID group name is displayed. Click this item to display "6.5 RAID Group Detail (Basic)" (page 318)
.
• Status
The RAID group status is displayed. Refer to "A.3 RAID Group Status" (page 407)
for detailed information of
RAID group status.
• RAID Level
The RAID level is displayed.
- High Performance (RAID1+0)
- High Capacity (RAID5)
- High Reliability (RAID6)
- High Reliability (RAID6-FR)
- Mirroring (RAID1)
- Striping (RAID0)
• Total Capacity
The total capacity of the RAID groups is displayed.
• Used Capacity
The used capacity of the RAID groups is displayed.
"Used Capacity" indicates the total for the physically allocated capacities of the TPVs in the RAID group.