Fujitsu ETERNUS DX8100 S3 - Page 360

Chapter 8 Advanced Copy Status
8.1 Advanced Copy (Basic Information)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
360
• Status
The status for XCOPY sessions are displayed.
- Normal
All the copy sessions are in the normal state.
- Error
At least one copy session is not in the normal state.
● Virtual Volume Sessions Information
• Session Count
The number of Virtual Volume sessions that are currently running is displayed.
The "Session Count" is a total of copy sessions in all the statuses including " Reserved". Click the [Session
Count] link to display the list of sessions.
- ETERNUS DX100 S3
0 - 4096
- ETERNUS DX200 S3
0 - 4096 (8192) (*1)
- ETERNUS DX500 S3/DX600 S3
0 - 16384
- ETERNUS DX8100 S3
0 - 16384
- ETERNUS DX8700 S3/DX8900 S3
0 - 65535
- ETERNUS AF250
0 - 1536
- ETERNUS AF650
0 - 6144
- ETERNUS DX200F
0 - 1536
*1: Values in parentheses indicate the number of sessions when "Expand Volume Mode" is "Enable". Refer to "Setup
Subsystem Parameters" in "ETERNUS Web GUI User’s Guide (Settings)" for details.
• Status
The Virtual Volume session status is displayed.
- Normal
All the copy sessions are in the normal state.
- Error
At least one copy session is not in the normal state.
● Advanced Copy Information
• Usable Advanced Copy Size
The Advanced Copy capacity that can be added to the session is displayed.
For the ETERNUS DX60 S3, this session information is not displayed.