Chapter 8 Advanced Copy Status
8.10 Copy Path Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
403
• Detail Information
Detailed information about the copy path is displayed.
If an error occurs in the copy path, the error details or location is displayed using the following
abbreviations. If there are multiple error locations, multiple abbreviations are displayed.
- Connectable
The copy path is in the normal state.
- Path Unstable
The copy path between the local storage system and remote storage system is in unstable status. For
example, link-down repeatedly occurs in a certain period of time or communication fails.
- Bitmap Resolution Mismatched
The resolution settings are different between the local and remote storage systems.
- Suspected Spot (D)
The copy path settings may be invalid.
- Suspected Spot (N)
The error occurs in the remote storage system.
- Suspected Spot (T)
The error occurs in the FC-RA port or iSCSI-RA port on the remote storage system.
- Suspected Spot (C)
The error occurs in the cable.
- Suspected Spot (O)
The error occurs in an adapter that is not for a local or a remote storage system. This occurs only when
the connection type is FC-AL.
- Suspected Spot (S)
The error occurs in the switch or switch settings.
- Suspected Spot (I)
The error occurs in the FC-RA port or iSCSI-RA port on the local storage system.
- Suspected Spot (M)
The error occurs in the memory.
To Next Page
Loading...
