Fujitsu ETERNUS DX8100 S3 - Page 394

Chapter 8 Advanced Copy Status
8.8 Advanced Copy (Property)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
394
• Concurrent Suspend Status
When an instruction to collectively and tentatively separate multiple pairs of a copy source volume and a
copy destination volume (Concurrent Suspend request) is received in EC session, transition status to
"Suspend" is displayed. This item is displayed in EC. If the status is " Reserved", a "-" (hyphen) is dis-
played. If the Concurrent Suspend Status cannot be obtained, "Unknown" is displayed.
- Normal
Transition to the "Suspend" state is complete or Concurrent Suspend cannot be performed
- Exec
Transition to the "Suspend" state in progress
- Error
Transition to the "Suspend" state failed
- Unknown
A status other than the ones listed above
■ For Remote Copy
The following items are displayed in the Main area:
• Session ID
The session ID selected in the [Remote Copy] screen is displayed.
• Source Volume Name
The following is displayed depending on the "Direction". If the status is " Reserved", a "-" (hyphen) is
displayed.
- When the "Direction" is "From Local/To Remote"
The copy source volume name is displayed.
- When the "Direction" is "From Remote/To Local"
The "Remote Box ID / Copy source volume number" is displayed.
Refer to "8.2 Advanced Copy (All Local Sessions)" (page 361) for the display items that are not described in
this section.