Fujitsu ETERNUS DX8100 S3 - Page 386

Chapter 8 Advanced Copy Status
8.7 Settings (Advanced Copy)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
386
The following items are displayed in the Main area:
● Local Storage System Information
• Box ID
The Box ID for the local storage system is displayed.
"Box ID" is an identifier used to identify individual storage systems. This ID is a unique name in the user
system and consists of 40-digit code.
The initial Box ID is a device ID consisting of device information (such as series name, model name, and
serial number).
● Remote Storage System Information
• Box ID
This is the Box ID of the remote storage system that has a path to the local storage system. Click this item
to display the [Copy Path] screen. Refer to "8.10 Copy Path Detail" (page 401)
for details.
• Connection Type
The type of connection to the remote storage system that has a path to the local storage system is
displayed.
- Direct
- Remote
• Priority Level
REC is performed using the priority level (Automatic Priority/High Priority/Middle Priority/Low Priority/Very
Low Priority) that is specified with the [Modify EC/OPC Priority] function (*1).
- Automatic
REC is performed using the priority level (Automatic Priority/High Priority/Middle Priority/Low Priority/
Very Low Priority) that is specified using the "Modify REC Multiplicity" function (*1).
- 1 - 8
REC is performed with the displayed priority level. "1" corresponds to "Very Low Priority", and "8"
corresponds to "High Priority" for the [Modify EC/OPC Priority] function (*1).
• Multiplicity
When the local storage system and the remote storage system are connected by remote connection, the
multiplicity is displayed. If the "Connection Type" is "Direct", a "-" (hyphen) is displayed.
- Automatic
REC is performed with the recommended multiplicity that is calculated by the [Measure Round Trip
Time] result (*2).
- 1 - 1024
REC is performed with the multiplicity that is manually specified with the [Modify REC Multiplicity]
function (*3).
• Recommended Multiplicity
When the local storage system and the remote storage system are connected by remote connection, the
recommended multiplicity is displayed. If the "Connection Type" is "Direct", a "-" (hyphen) is displayed.
- 1 - 1024
The recommended multiplicity that is calculated by the [Measure Round Trip Time] result (*2).
- ***
The round trip time is not measured by the [Measure Round Trip Time] function (*2).