EasyManua.ls Logo

Fujitsu ETERNUS DX8100 S3 - Page 11

Fujitsu ETERNUS DX8100 S3
423 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
11
Notes for ETERNUS Web GUI
Notes for Using ETERNUS Web GUI
Note the following points when using ETERNUS Web GUI:
If the PC and the ETERNUS DX/AF belong to a different network and the transfer rate setting for each
network does not match, the retransmission of packets occurs more frequently and the operation screen
for ETERNUS Web GUI may take more time to be displayed.
By setting the same transfer rate for each network, the time to display the operation screen can be
reduced.
Note the following items when setting the transfer rate.
- Set the same transfer rate for each network (or adjust to the lowest of the transfer rates)
- When the transfer rate for the ETERNUS DX/AF is not "Auto-negotiation", the same transfer rate must
also be set for the network switches
Do not use the standard buttons of each browser (for example, the [Back] button, the [Forward] button,
and the [Refresh] button), the [F5] (refresh) key, or the [Back Space] (back) key.
If the message "Lock was relinquished to another user or expired by timeout." appears after the operation
is started, the ETERNUS Web GUI operation is suspended due to an update by another user or a timeout.
Click the [OK] button to return to the previous screen and then restart the function.
If the confirmation message "Do you wish to forcibly acquire the lock?" appears after the operation is
started, another user is updating data. If the [OK] button is clicked, the data update of the other user may
fail.
If the warning message "The login authority was lost." appears after the operation is started, the login
state of ETERNUS Web GUI for the current user is lost. Click the [OK] button to return to the login screen.
Log in again to continue using ETERNUS Web GUI.
Operating Environment
The following PC environment is required to use ETERNUS Web GUI.
Confirmed operating environment Version
Web browser Microsoft Internet Explorer 7.0, 8.0, 9.0, 10.0 (desktop version),
11.0 (desktop version)
Mozilla Firefox 3.6.x, ESR 10.0.x, ESR 17.0.x, ESR 24.0.x
Display resolution
1024 × 768 or more
24-bit color or more is recommended

Table of Contents

Other manuals for Fujitsu ETERNUS DX8100 S3

Related product manuals