Chapter 3 Component Status
3.7 Controller Module Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
130
The following items are displayed in the Main area:
• Parts
The component name and the component number are displayed.
A link is displayed when the "Parts" is "SAS Cable". Click this link to display the [SAS Cable] screen. Refer to
"3.21 SAS Cable Detail" (page 171)
for display items.
The following items are displayed for the ETERNUS DX8700 S3/DX8900 S3.
- A link is displayed when the "Parts" is "Frontend Cable". Click this link to display the [Frontend Cable]
screen. Refer to "3.22 Frontend Cable Detail" (page 172)
for display items.
- A link is displayed when the "Parts" is "Management Cable". Click this link to display the [Management
Cable] screen. Refer to "3.23 Management Cable Detail" (page 173)
for display items.
- A link is displayed when the "Parts" is "BUD". Click this link to display the [Bootup and Utility Device
Detail] screen. Refer to "3.20 Bootup and Utility Device Detail" (page 169)
for display items.
• Status
The component status is displayed. Refer to "A.5 Component Status" (page 410)
for details.
• Error Code
The component error code is displayed.
• Notes
Remarks are displayed.
- When "Parts" is "Memory", the memory capacity is displayed.
- When "Parts" is "SCU", the voltage information is displayed (for the ETERNUS DX60 S3/DX100 S3/DX200
S3, the ETERNUS AF250, and the ETERNUS DX200F).
■ View
● For the ETERNUS DX8700 S3/DX8900 S3
To Next Page
Loading...
