Fujitsu ETERNUS DX8100 S3 - Page 133

Chapter 3 Component Status
3.8 Channel Adapter Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
133
The following items are displayed in the Main area:
• Location
The CA installation location is displayed.
• CA Type
The CA type is displayed.
The display items in this field vary depending on the storage system model.
- For the ETERNUS DX60 S3
• FC 2port
• 1G-iSCSI 2port
• 10G Base-T iSCSI 2port
• 6G-SAS 2port
- For the ETERNUS DX100 S3/DX200 S3
• FC 2port
• 10G-iSCSI 2port
• 1G-iSCSI 2port
• 10G Base-T iSCSI 2port
• 6G-SAS 2port
• 10G-FCoE 2port
• 10G-NAS 2port
• 1G-NAS 4port
- For the ETERNUS DX500 S3/DX600 S3
• FC 2port
• FC 4port
• 10G-iSCSI 2port
• 1G-iSCSI 2port
• 1G-iSCSI-RA 2port
• 10G-FCoE 2port
• 10G-NAS 2port
• 1G-NAS 4port
- For the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3
• FC 2port
• FC 4port
• 10G-iSCSI 2port
• 1G-iSCSI 2port
• 1G-iSCSI-RA 2port
• 10G-FCoE 2port
- For the ETERNUS AF250
• FC 2port
• 10G-iSCSI 2port
• 10G Base-T iSCSI 2port
- For the ETERNUS AF650
• FC 2port
• FC 4port
• 10G-iSCSI 2port