Fujitsu ETERNUS DX8100 S3 - Page 154

Chapter 3 Component Status
3.15 Drive Enclosure Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
154
● For 3.5" high density DEs
The following items are displayed in the Main area:
• Storage system image
The front view of the DEs that are installed in the ETERNUS DX/AF is displayed. The number of drives that
can be installed for each DE type is as follows:
- 2.5" DEs
24 drives (24drives are lined up horizontally)
- 3.5" DEs
12 drives (3 drives are lined up vertically and 4 drives are lined up horizontally)
- 3.5" high density DEs
60 drives (5 drives are lined up vertically and 12 drives are lined up horizontally)
- When no drives are installed
Blank
The drive status is displayed with an icon. Refer to "A.5 Component Status" (page 410)
for details.
By clicking this item, the [Drives] screen is displayed. Refer to "3.19 Drive Detail" (page 164)
for details.
• Parts
The drive number is displayed.
By clicking this item, the [Drives] screen is displayed. Refer to "3.19 Drive Detail" (page 164)
for details.
• Status
The drive status is displayed. Refer to "A.5 Component Status" (page 410)
for details.
• Capacity
The capacity of the drive is displayed.
• Speed
The drive speed is displayed. For SSD or SSD SED, a "-" (hyphen) is displayed.
- 15000 rpm
- 10000 rpm
- 7200 rpm
The drive capacity that is displayed for the SSD-L differs from the product's actual capacity. For example,
the drive capacity of a "1.92TB SSD-L" is displayed as "2.00 TB".