Fujitsu ETERNUS DX8100 S3 - Page 156

Chapter 3 Component Status
3.15 Drive Enclosure Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
156
■ Rear View
The following items are displayed in the Main area:
• Storage system image
The rear view of the DE that is installed in the ETERNUS DX/AF is displayed.
The status of the IOM, the PSU, and the FEM are displayed with icons. Refer to "A.5 Component Status"
(page 410) for details.
By clicking the IOM number, the [I/O Module] screen is displayed. Refer to "3.16 I/O Module Detail" (page
157) for display items.
By clicking the PSU number, the [Power Supply Unit] screen is displayed. Refer to "3.17 Power Supply Unit
(DE) Detail" (page 159) for display items.
By clicking the FEM number, the [Fan Expander Module] screen is displayed. Refer to "3.18 Fan Expander
Module Detail" (page 161) for display items.
• Parts
The IOM number, the PSU number, or the FEM number is displayed.
By clicking the IOM number, the [I/O Module] screen is displayed. Refer to "3.16 I/O Module Detail" (page
157) for display items.
By clicking the PSU number, the [Power Supply Unit] screen is displayed. Refer to "3.17 Power Supply Unit
(DE) Detail" (page 159) for display items.
By clicking the FEM number, the [Fan Expander Module] screen is displayed. Refer to "3.18 Fan Expander
Module Detail" (page 161) for display items.
• Status
The status of IOM, PSU, or FEM is displayed. Refer to "A.5 Component Status" (page 410)
for details.