Fujitsu ETERNUS DX8100 S3 - Page 158

Chapter 3 Component Status
3.16 I/O Module Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
158
■ Internal Parts
The following items are displayed in the Main area:
• Parts
The internal parts of the IOM are displayed. A link is displayed when the part is "SAS Cable". Click this item
to display the [SAS Cable Detail] screen. Refer to "3.21 SAS Cable Detail" (page 171)
for display items.
When the part is a high density DE, "IOM FEM Port#y" (y: 0, 1) is displayed.
• Status
The internal parts status of the IOM is displayed. Refer to "A.5 Component Status" (page 410)
for details.
• Error Code
The error code for the internal parts of the IOM is displayed.
■ View
The following items are displayed in the Main area:
• Storage system image
The rear view of the DE that is installed in the ETERNUS DX/AF is displayed.
Components that are not the target IOM are grayed out.
The IOM status is displayed with an icon. Refer to "A.5 Component Status" (page 410)
for details.