Fujitsu ETERNUS DX8100 S3 - Page 188

Chapter 3 Component Status
3.24 Port Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
188
■ Sensor Information
The real time and threshold values (Low/High) for the temperature, voltage, current, transmission
power, and received power are displayed in the Sensor Information.
When the information cannot be obtained, a "-" (hyphen) is displayed.
The target components for this information are FCoE that have SFPs from which information can be
obtained.
Refer to "Sensor Information" (page 178)
for display items
● NAS port
The detailed NAS port information is displayed.
The following items are displayed in the Main area:
■ CM#x CA#y Port#z Information
- Location
The location information of the port is displayed.
• CM#x CA#y Port#z (x: CM number, y: CA number, z: Port number)
- Port Mode
The port mode (fixed to "CA") is displayed.
- Status
The port status is displayed. Refer to "A.5 Component Status" (page 410)
for details.
- Status Code
The port status code is displayed.
- Error Code
The port error code is displayed.
- Type
The type of the port is displayed.
• 10G NAS
• 1G NAS