Fujitsu ETERNUS DX8100 S3 - Page 196

Chapter 4 Volume Status
4.1 Volume (Basic Information)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
196
• RAID Group/TPP/FRTP No.
The following number is displayed:
- If the type is "WSV"
The RAID group number to which the representative volume (*1) belongs is displayed.
*1: A volume for WSV, which is created by concatenating multiple RAID groups with striping, that belongs to the
RAID group that is first in the concatenation order.
- If the type is "TPV"
The Thin Provisioning Pool (TPP) number to which the volume belongs is displayed.
- If the type is "FTV"
The Flexible Tier Pool (FTRP) number to which the volume belongs is displayed.
- If the type is not one of the types listed above
The RAID group number to which the volume belongs is displayed.
• RAID Group/TPP/FTRP Name
The following name is displayed:
- If the type is "WSV"
The RAID group name to which the representative volume belongs is displayed.
- If the type is "TPV"
The Thin Provisioning Pool (TPP) name to which the volume belongs is displayed.
- If the type is "FTV"
The Flexible Tier Pool (FTRP) name to which the volume belongs is displayed.
- If the type is not one of the types listed above
The RAID group name to which the volume belongs is displayed.
• Encryption
The encryption status is displayed.
For the ETERNUS DX60 S3, this item is not displayed.
- CM
A volume that is encrypted by CM
- "-" (hyphen)
A volume that is not encrypted (plain text volume)
- SED
A volume that is encrypted by SED
• UID
The Universal Identifier (UID) is displayed.
The UID is an identifier (storage system name) to specify a volume from the open system server.
A "-" (hyphen) is displayed for the Deduplication/Compression System Volume.