Fujitsu ETERNUS DX8100 S3 - Page 214

Chapter 4 Volume Status
4.7 Pinned Data
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
214
• Type
The volume type is displayed.
- Standard
- WSV
- TPV
- FTV
- SDV
- SDPV
- Temporary
• Usage
The usage of the volume is displayed.
- Block
The volumes that are used for the SAN.
- File
The volumes that are used for the NAS.
- System
The volumes that are used for management information.
Refer to "Usage Details" (page 228)
in "4.11 Volume Detail (Basic)" (page 223) for details.
• RAID Group/TPP/FRTP No.
The following number is displayed:
- If the type is "WSV"
The RAID group number to which the representative volume (*1) belongs is displayed.
*1: A volume for WSV, which is created by concatenating multiple RAID groups with striping, that belongs to the
RAID group that is first in the concatenation order.
- If the type is "TPV"
The Thin Provisioning Pool (TPP) number to which the volume belongs is displayed.
- If the type is "FTV"
The Flexible Tier Pool (FTRP) number to which the volume belongs is displayed.
- If the type is not one of the types listed above
The RAID group number to which the volume belongs is displayed.
• RAID Group/TPP/FTRP Name
The following name is displayed:
- If the type is "WSV"
The RAID group name to which the representative volume belongs is displayed.
- If the type is "TPV"
The Thin Provisioning Pool (TPP) name to which the volume belongs is displayed.
- If the type is "FTV"
The Flexible Tier Pool (FTRP) name to which the volume belongs is displayed.
- If the type is not one of the types listed above
The RAID group name to which the volume belongs is displayed.
• Controlling CM
The Controlling CM of the RAID group to which the volume belongs is displayed.