Fujitsu ETERNUS DX8100 S3 - Page 216

Chapter 4 Volume Status
4.8 Bad Sector
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
216
• Type
The volume type is displayed.
- Standard
- WSV
- TPV
- FTV
- SDV
- SDPV
- Temporary
• Usage
The usage of the volume is displayed.
- Block
The volumes that are used for the SAN.
- File
The volumes that are used for the NAS.
- System
The volumes that are used for management information.
Refer to "Usage Details" (page 228)
in "4.11 Volume Detail (Basic)" for details.
• Error LBA
The start position of the bad sector information in the volume is displayed using the Logical Block Address
(LBA).
When the volume type is WSV or when the volume is concatenated by LUN concatenation, the LBA for each
volume that is concatenated (*1) is displayed.
A "-" (hyphen) is displayed when the "Error Type" is "Dispersion".
• Error LBA Count
The number of LBAs from Error LBA of the bad sector information in the volume is displayed.
When the volume type is WSV or when the volume is concatenated by LUN concatenation, the LBA Count
for each volume that is concatenated (*1) is displayed.
A "-" (hyphen) is displayed when the "Error Type" is "Dispersion".
• Error Type
The number of bad sector information in the volume is displayed.
- When one bad sector information exists in the volume: "Contiguity"
- When multiple number of bad sector information exist in the volume: "Dispersion"
*1: Each volume is displayed in "volume name (n/m)" format (n: nth volume in the concatenation order, m: number of
concatenated volumes). Refer to "4.1 Volume (Basic Information)" (page 194) for details.