Fujitsu ETERNUS DX8100 S3 - Page 219

Chapter 4 Volume Status
4.9 Balancing Thin Provisioning Volume
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
219
• Balancing Process
When "Process" is not "Balancing", a "-" (hyphen) is displayed.
- Status
The status of TPV balancing is displayed.
• Active
Running normally
• Error
Stopped due to an error
- Progress
The progress of TPV balancing is displayed.
- Work Vol. No.
The volume number undergoing TPV balancing is displayed.
- Work Vol. Name
The volume name undergoing TPV balancing is displayed.
- Error Code
The error code of TPV balancing is displayed when an error occurs.
- Elapsed Time
The elapsed time of TPV balancing is displayed.
The displayed time is the elapsed time at the point when this screen is displayed.
Filter setting
Filter Description
Name
Input the volume name that is to be displayed.
When not using the volume name for filtering, leave this item blank.
Status Select the volume status that is to be displayed.
Usage Select the usage of the volume that is to be displayed.
Balancing Level Select the volume type that is to be displayed.
Process Select which current process for the volume is to be displayed.