Chapter 4 Volume Status
4.11 Volume Detail (Basic)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
224
● NAS user volume
● Deduplication/Compression Volume
The following items are displayed in the Main area:
• Status
The volume status is displayed.
When the volume status is normal, " Available" is displayed.
Refer to "A.2 Volume Status" (page 406)
for detailed information of RAID group status.
• Capacity
The volume capacity is displayed with "MB", "GB", or "TB". The unit of measurement for the capacity is
determined according to the actual volume size.
• Capacity on RAID Group
The volume capacity is displayed with "MB", "GB", or "TB". The unit of measurement for the capacity is
determined according to the actual volume size. The capacity is also displayed with "KB".
While the capacity that is specified by the user when creating the volume is displayed in the "Capacity"
field described above, the volume capacity that is actually secured in units of the basic volume size in the
RAID group is displayed in this field. This item is displayed when the volume type is "Standard", "WSV",
"SDV", "SDPV", or "Temporary".
To Next Page
Loading...
