Fujitsu ETERNUS DX8100 S3 - Page 25

Chapter 1 Screen Operations
1.1 Overview
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
25
■ Hardware Components
The number of components for each status is displayed.
• Normal
- Modules
The number of components (*1) in normal status (" " or " ") is displayed.
- Drives
The number of drives in normal status (" " or " ") is displayed.
• Warning
- Modules
The number of components (*1) in warning status (" " or " ") is displayed.
- Drives
The number of drives in warning status (" " or " ") is displayed.
• Error
- Modules
The number of components (*1) in error status (" ") is displayed.
- Drives
The number of drives in error status (" ") is displayed.
*1: The number of components that can be maintained. The number of components does not include the number of
drives.
■ System Information
The information of the ETERNUS DX/AF is displayed.
• Storage System Name
The name for the ETERNUS DX/AF is displayed.
When logged in with a user account that can display detailed component information (*1), a link is
displayed on the storage system name.
Click this link to display the [Storage] screen in the [Component] navigation.
*1: A user account with the "Status Display" policy or the "Maintenance Operation" policy can display detailed
component information. When logged in with a user account that has a "Monitor", "Admin", "StorageAdmin",
"SecurityAdmin", or "Maintainer" default role, a link is displayed on the storage system name.
• Model Name
The model name of the ETERNUS DX/AF is displayed.
• Unified Storage
The support status of the unified storage function is displayed.
If the Unified Storage function is enabled, the ETERNUS DX can be used as a Unified Storage system (a SAN
and NAS system).
For the ETERNUS DX60 S3 and the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, this item is not displayed.
For the ETERNUS AF250/AF650 and the ETERNUS DX200F, "Disable" is displayed.
When upgrading a SAN system to a Unified Storage system, after the unified firmware is applied to the
active and inactive controllers, this item is changed to "Enable".