Fujitsu ETERNUS DX8100 S3 - Page 250

Chapter 5 Connectivity Status
5.2 Host Group
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
250
• Host Group
The host group name, to which the FC host belongs, is displayed.
If the FC host does not belong to a host group, a "-" (hyphen) is displayed.
• CA Port Group
The name of the CA port group that has the host affinity setting with the FC host is displayed.
If no CA port group with the host affinity setting exists, a "-" (hyphen) is displayed.
• CA Port
The location information (x: CE number, y: CM number, z: CA number, w: Port number) of the CA port that
has the host affinity setting with the FC host is displayed.
If no CA port with the host affinity setting exists, a "-" (hyphen) is displayed.
- For the ETERNUS DX8700 S3/DX8900 S3
CE#x CM#y CA#z Port#w
- For the other models
CM#y CA#z Port#w
• Host Response
The host response that is assigned to the FC host or to the host group of the FC host is displayed.
• Status
Whether the host affinity setting is applied to the FC host is displayed.
"Host Affinity Setting" is to specify association between "Host Group", "CA Port Group", and "LUN Group" or
association between "Host", "CA Port", "and "LUN Group". The host affinity setting specifies the path
between each host and port.
- Active
The host affinity setting is applied to the FC host. The LUN group can be accessed from the FC host.
- Inactive
The host affinity setting is not applied to the FC host.
Filter setting
Filter Description
Name
Input the FC host name that is to be displayed.
When not using the name for filtering, leave this item blank.
WWN
Input the WWN for the FC host that is to be displayed.
When not using the WWN for filtering, leave this item blank.
Host Group
Input the name of the host group to which the FC host that is to be displayed belongs.
When not using the host group for filtering, leave this item blank.
CA Port Group
Input the name of the CA port group that has the host affinity setting with the FC host
that is to be displayed.
When not using the CA port group for filtering, leave this item blank.
CA Port
Select the CA port that has the host affinity setting with the FC host that is to be
displayed.
Host Response
Select the name of the host response that is assigned to the FC host that is to be
displayed.
Status Select the set state of the host affinity for the FC host that is to be displayed.