Fujitsu ETERNUS DX8100 S3 - Page 323

Chapter 6 RAID Group Status
6.7 RAID Group Detail (Drives)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
323
- 2.5" SSD-L
2.5-inch SSD-L (12 Gbit/s) (*1)
- 3.5" SSD-L
3.5-inch SSD-L (12 Gbit/s) (*1)
- 2.5" SSD
2.5-inch SSD (6 Gbit/s) (*1)
- 3.5" SSD
3.5-inch SSD (6 Gbit/s) (*1)
- 2.5" Online SED
2.5-inch Online SED
- 3.5" Nearline SED
3.5-inch Nearline SED
- 2.5" SSD-M SED
2.5-inch SSD-M SED (*2)
- 3.5" SSD-M SED
3.5-inch SSD-M SED (*2)
- 2.5" SSD-L SED
2.5-inch SSD-L SED (*2)
- 3.5" SSD-L SED
3.5-inch SSD-L SED (*2)
*1: The displayed item varies depending on the interface speed (bandwidth) or the capacity of the reserved space.
Unless otherwise specified, this manual refers to "SSD-M", "SSD-L", and "SSD" collectively as "SSD".
*2: In this manual, there may be cases when "SSD SED" is used as a collective term for options and drive types.
• Capacity
The capacity of the drive is displayed.
• Speed
The drive speed is displayed. For SSD or SSD SED, a "-" (hyphen) is displayed.
• Usage
The usage of the drive is displayed.
- Data
A drive that is used for user data or an unused drives
- Global Hot Spare
A drive that is registered as a Global Hot Spare
- Dedicated Hot Spare
A drive that is registered as a Dedicated Hot Spare
The drive capacity that is displayed for the SSD-L differs from the product's actual capacity. For example,
the drive capacity of a "1.92TB SSD-L" is displayed as "2.00 TB".