Fujitsu ETERNUS DX8100 S3 - Page 339

Chapter 7 Thin Provisioning Pool Status
7.1 Thin Provisioning Pools
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
339
• Eco-mode Action
The Eco-mode schedule action status is displayed.
When no Eco-mode schedule has been assigned, a "-" (hyphen) is displayed.
- Drive power off
The power for the drive is turned off during Eco-mode operation.
- Drive motor off
The drive motor is stopped during Eco-mode operation.
- Drive always on
Disable Eco-mode and the drive is always active.
• Motor Status
The drive motor status is displayed.
- Active
The drive motors are activated.
- In the Boot Process
The drive motors are starting up.
- Idle
The drive motors are stopped.
- In the Stop Process
The drive motors are being stopped.
- Power Off
The drive power is being turned off.
Filter setting
Filter Description
Name
Input the TPP name that is to be displayed.
When not using the TPP name for filtering, leave this item blank.
Drive Type Select the drive type that is to be displayed.
RAID Level Select the RAID level that is to be displayed.
Eco-mode Schedule Select the Eco-mode schedule that is to be displayed.
Eco-mode Action
Select the Eco-mode action that is to be displayed.