Fujitsu ETERNUS DX8100 S3 - Page 341

Chapter 7 Thin Provisioning Pool Status
7.2 Flexible Tier Pools
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
341
The following items are displayed in the Main area:
• No.
The FTRP number is displayed. Click this item to display the screen shown in "7.2.2 Flexible Tier Pool Detail
(Basic)" (page 343).
• Name
The FTRP name is displayed. Click this item to display the screen shown in "7.2.2 Flexible Tier Pool Detail
(Basic)" (page 343).
• Status
The FTRP status is displayed. Refer to "A.4 Thin Provisioning Pool Status" (page 409)
for detailed
information of FTRP status.
• Used Status
The usage of FTRP is displayed.
- Normal
FTRP usage does not exceed the "Attention" threshold.
- Attention
FTRP usage exceeds the "Attention" threshold but does not exceed the "Warning" threshold.
- Warning
FTRP usage exceeds the "Warning" threshold.
• Provisioned Capacity
The total logical capacity of FTVs in the FTRP is displayed.
• Provisioned Rate
The ratio (%) of the total logical capacity of FTVs in the FTRP and the total capacity of the FTRP is displayed.
Capacity ratio (Provisioned Rate) = Total logical capacity of FTVs in the relevant FTRP (Provisioned
Capacity) / Total capacity of the relevant FTRP (Total Capacity)
• Total Capacity
The total capacity of FTRP is displayed.
• Used Capacity
The used capacity of the FTRP is displayed.
"Used Capacity" indicates the total for the physically allocated capacities of the FTVs in the FTRP.