EasyManua.ls Logo

Fujitsu ETERNUS DX8100 S3 - Page 363

Fujitsu ETERNUS DX8100 S3
423 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 8 Advanced Copy Status
8.2 Advanced Copy (All Local Sessions)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
363
- EC
The time stamp is updated at Suspend and when an error occurs.
The following information is displayed:
When "Status" is " Active" and the copy session is not suspended yet, "0" is displayed for all of the
display items. When suspend is requested and "Status" is " Active", the backup time of the
previous suspend that was requested is displayed.
When "Status" is " Suspend", the backup time when the copy was suspended is displayed.
When "Status" is " Error Suspend", the time when an error occurred is displayed.
- Monitor
When "Status" is " Active", "0" is displayed for all of the display items.
Elapsed Time
The elapsed time after a copy session has started is displayed. If the status is " Reserved", a "-" (hyphen)
is displayed.
Copied Data Size
The size of a copy that has been completed is displayed. If the status is " Reserved", a "-" (hyphen) is
displayed.
When the copy type is "SOPC" or "SOPC+", only the original data (or previous data) before update in the
copy target area is copied.
When the copy type is "MON", the updated data in the area for monitoring updates is copied. This copy
type performs a pseudo copy to measure the updated amount of data.
Total Data Size
The data size of the copy target area is displayed. If the status is " Reserved", a "-" (hyphen) is displayed.
When the copy type is "MON", the data size of the area for monitoring updates is displayed.
Resolution
The copy session resolution is displayed. If the status is " Reserved", a "-" (hyphen) is displayed.
Requestor
The information of the client that started the copy session is displayed. If the status is " Reserved", a "-"
(hyphen) is displayed.
- SCSI
Copy session requested by the copy management software (via SCSI).
- LAN
Copy session requested by the copy management software (via LAN).
- GUI
Copy session requested by ETERNUS Web GUI.
- CLI
Copy session requested by ETERNUS CLI.
- SMI-S
Copy session requested by SMI-S.
- Unknown
Other than the above clients.

Table of Contents

Other manuals for Fujitsu ETERNUS DX8100 S3

Related product manuals