Fujitsu ETERNUS DX8100 S3 - Page 68

Chapter 2 System Status
2.10 Storage Migration
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
68
• Source LUN Status
The status of the source LUN is displayed.
- Available
The source LUN can be used
- Not Available
The source LUN cannot be used
- Not Exist
The source LUN does not exist
• Destination Volume No.
The destination volume number is displayed in decimal number.
• Destination Volume Name
The destination volume name is displayed.
• Destination Volume No. (Hex)
The destination volume number is displayed in hexadecimal number.
• Capacity
The destination volume capacity is displayed.
• Migration Status
The data migration status is displayed.
This item is displayed only when the previous screen is the [Storage Migration] screen.
- Initial
Initial state
- Waiting
Awaiting migration
- Running
Migrating
- Normal End
Normally completed
- Suspend
In suspension
- Stop
Stopped
- Error (xxx)
(xxx) indicates the error factor.
- "-" (hyphen)
Does not exist in the source LUN (the LUN status is "Not Exist").
• Progress
The data transfer progress is displayed.
This item is displayed only when the previous screen is the [Storage Migration] screen.
If "Waiting" is displayed, the data migration does not start automatically. Restart the data migration
manually.